№3|2019

WASTEWATER TREATMENT

bbk 000000

UDC 628.16.066.7

Boldyrev Vladimir Vasil'evich

Analytical model of sedimentation process based on the equation of continuity of settling polydisperse suspension flow (to be discussed)

Summary

In the well-known studies on the precipitation of polydisperse suspension the latter is identified with suspended (fluidized) bed. However all currently used mathematical models of natural and wastewater sedimentation processes do not take this circumstance into account and sometimes contradict it. Models of the processes of sedimentation in the strict sense have not yet been developed; instead separate methods are used with the help of which the process of sedimentation implemented in laboratory cylinders is carried out in industrial clarifiers. In this simulation the value of the main parameter of the sedimentation process (hydraulic size or sedimentation rate) always decreases with time. In the proposed model the flow of settling suspension is presented as fluidized bed. Moreover this flow has the properties of integrity and continuity of the values of its physical characteristics; whereas the flow rate in this case remains constant. In the process of the model design it was suggested that the concentration of suspended solids in the flow remained average by volume of the clarifier. Taking into account the continuity equation the sedimentation rate is proposed to be understood as the sedimentation rate of polydisperse suspension in the selected flow section that corresponds to the mass flow of suspension through the given section. Based on the above prerequisites a balance differential equation has been compiled that describes the process of sedimentation in a batch clarifier including laboratory cylinders. The solution of the differential equation provides for the formulas for calculating the clarification efficiency both for batch and flow-through clarifiers with time. In order to check the adequacy of the mathematical model the results of calculating the clarification efficiency using the obtained formulas were compared with the results of experiments carried out by other authors and with the typical project solutions. From the analysis of graphs it was concluded that the values of the clarification efficiency calculated theoretically have good convergence with the experimental data given in typical projects.

Key words

, , , , , , , ,

The further text is accessible on a paid subscription.
For authorisation enter the login/password.
Or subscribe

REFERENCES

  1. Soleimani M., Mohammadi M. Feasibility of increasing the efficiency of primary settling tanks by using thin layer plates. Journal of American Science, 2012, no. 8 (11), pp. 39–48.
  2. Boldyrev V. V., Davydov E. I., Kuznetsov R. S., Rozhkov S. I. [Pat. 2173570, RF. MPC В01D 21/02. Settling tank]. Izobreteniia. Poleznye Modeli, 2009, no. 26. (In Russian).
  3. Boldyrev V. V., Davydov E. I. [Pat. 2182508, RF. MPC В01D 21/02. Settling tank]. Izobreteniia. Poleznye Modeli, 2005, no. 14. (In Russian).
  4. Boldyrev V. V. [Pat. 2471717, RF. MPC С02F 1/44, B01D 61/10, B01D63/16, С02F 103/04. Installation for water treatment]. Izobreteniia. Poleznye Modeli, 2009, no. 26. (In Russian).
  5. Boldyrev V. V. [Pat. 2568702, RF. MPC B01D 21/06, С02F 1/00. Device for regulating wastewater flow rate and treatment]. Izobreteniia. Poleznye Modeli, 2015, no. 32. (In Russian).
  6. Zhukov A. I., Mongait I. L., Itsikson B. Z., Khaskin S. A. Proektirovanie sooruzheniy dlya ochistki promyshlennykh stochnykh vod [Designing industrial wastewater treatment facilities. Under the editorship of Zhukov A. I. Moscow-Leningrad, Gosstroiizdat Publ., 1949, 264 p.].
  7. Zhukov A. I., Mongait I. L., Rodziller I. D. Kanalizatsiya promyshlennykh predpriyatiy [Industrial sewerage. Moscow, Gosstroiizdat Publ., 1962, 602 p.].
  8. Itkin A. L. Eksperimental’noe issledovanie protsessa osvetleniya gorodskikh stochnykh vod v pokoe i radial’nom otstoynike [Experimental study of municipal wastewater clarification process at rest and in a circular settling tank: Dissertation for the degree of Ph. D. in Engineering. Moscow, Moscow Civil Engineering Institute named after V. V. Kuibyshev Publ., 1968, 141 p.].
  9. Itkin A. L. [On technological modeling of wastewater clarification process / Wastewater treatment studies. Collection of works of MISI named after V. V. Kuibyshev]. Moscow, Moscow Civil Engineering Institute named after V. V. Kuibyshev Publ., 1970, no. 66, pp. 92–99. (In Russian).
  10. Iakovlev S. V., Kalitsun V. P. Mekhanicheskaya ochistka stochnykh vod [Mechanical wastewater treatment. Moscow, Stroiizdat Publ., 1972, 199 p.].
  11. Kalitsun V. I., Laskov Iu. M. [Laboratory course on wastewater disposal and treatment. Мoscow, Stroiizdat Publ., 1995. 267 p.].
  12. Ivanov V. G., Semenov V. P., Simonov Iu. M. Laboratornyy praktikum po vodootvedeniyu i ochistke stochnykh vod [The use of laminar clarifiers in pulp and paper industry. Moscow, Lesnaia Promyshlennost’ Publ., 1989, 176 p.].
  13. Iakovlev S. V., Karelin Ia. A., Zhukov A. I., Kolobanov S. K. Kanalizatsiya [Sewerage. Moscow, Stroiizdat Publ., 1975, 632 p.].
  14. Kilimnik D. Iu. Razrabotka metoda rascheta skorostey sedimentatsii chastits v polidispersnoy suspenzii [Designing the method of calculating the sedimentation velocity of particles in polydisperse suspension: Dissertation for the degree of Ph. D. in Engineering. Saint-Peterburg, 2004, 140 p.].
  15. Ponomarev V. G. [Settling tank modeling and calculation]. Vodosnabzhenie i Sanitarnaia Tekhnika, 2010, no. 1, pp. 37–41. (In Russian).
  16. Kasatkin A. G. Osnovnye protsessy i apparaty khimicheskoy tekhnologii [Main processes and apparatus of chemical technology. Moscow. Khimiia Publ., 1973, 752 p.].
  17. Prandl’ L. Gidroaeromekhanika [Hydroaeromechanics. Izhevsk, «Regular and Random Dynamics» SRC Publ., 2000, 576 p.].
  18. Gudkov A. G. Mekhanicheskaya ochistka stochnykh vod [Mechanical wastewater treatment. Vologda, Vologda State Technical University Publ., 2003, 152 p.].
  19. Paal’ L. L., Karu Ia. Ia., Mel’der H. A., et al. Spravochnik po ochistke prirodnykh i stochnykh vod [Natural and wastewater treatment manual. Moscow, Vysshaia Shkola Publ., 1994, 336 p.].
  20. Shifrin S. M. Sovremennye sposoby mekhanicheskoy ochistki stochnykh vod [Advanced methods of mechanical wastewater treatment. Moscow, Gosstroiizdat Publ., 1956, 179 p.].
  21. Boldyrev V. V., Davydov E. I. [Mathematical model of sedimentation process. Training research and teaching staff. Collection of works of Ph. D. candidates and junior scientific assistants]. Saint-Peterburg, VITU Publishing House, 2000, issue 5, pp. 122–124. (In Russian).
  22. Boldyrev V. V., Davydov E. I. [Sedimentation-diffusion model of processes of natural and wastewater clarification. Problems of logistical support of military construction complex. Collection of articles and papers]. Saint-Peterburg, VITU Publishing House, 2000, pp. 56–64. (In Russian).
  23. Davydov E. I., Liamaev B. F. [Method of calculating a vertical settling tank with spiral-wound fille. Collection of works of «Water treatment technologies» VI International Scientific-Practical Conference «TEKHNOVOD-2011»]. Cheboksary, 2011. Novocherkassk, Lik Publ., 2011, pp. 110–115. (In Russian).
  24. Davydov E. I. Protsessy osvetleniya prirodnykh i stochnykh vod v vertikal’nom otstoynike so spiral’no-navitoy nasadkoy [Natural and wastewater clarification processes in calculating a vertical settling tank with spiral-wound filler. Dissertation for the degree of Ph. D . in Engineering. Saint-Peterburg, VITU Publishing House, 2011, 137 p.].
  25. Gulp G., Hansen S., Richardson G. High-rate sedimentation in water treatment works. JAWWA, 1968, v. 60, no. 6, pp. 681–697.
  26. Yates J. Osnovy mekhaniki psevdoozhizheniya s prilozheniyami [Fundamentals of fluidized-bed mechanics with appendixes. Trans. from English Kazenina D. A., Markova V. G.; under the editorship of Gupalo Iu. P. Moscow, Mir Publ., 1986, 288 p.].

Banner Oct 2024

myproject msk ru

Баннер конференции г. Пятигорск

souz ingenerov 02

Aquatherm 200x200 gif ru foreign