Tag:current density

№8|2018

WATER TREATMENT

bbk 000000

UDC 628.166:661.417/.418

FESENKO L. N., Pchel'nikov I. V., Terikov A. S., Nguen Tkhi Tuan Z’ep

Study of chloride concentration effect on the generation  of active chlorine in direct electrolysis

Summary

Electrochemical sodium hypochlorite has been most often used in water treatment at the water and wastewater treatment facilities. Natural water containing chlorides can be used as raw material for its production. The results of studies of electrolysis of low minera­lized water with 25, 50 and 100 mg/dm3 chloride concentration are presented. The simulated solution was prepared by «Ekstra» table salt dilution in distilled water. The tests were carried out within 10–500 A/m2 current density range. The concentration of active chlorine is increasing alongside with the electrolysis time. It is stated that at the preset values of anodic current density active chlorine of different concentrations can be obtained, e. g. up to 220 mg/dm3 at 100 A/m2 current density and 100 mg/dm3 chloride concentration. The process is notable for the amount of generated active chlorine exceeding the stoichiometric chloride concentration in water in process up to 1.7–1.9 times; this can be caused by the formation of other oxidants, e. g. hydrogen peroxide. At the current density less than 500 A/m2 the output of active chlorine decreases. According to the experimental results a nomogram for determining the active chlorine current yield depending on the chlorine concentration in the solution and current density is proposed.

Key words

, , , , ,

 

№10|2019

WATER TREATMENT

DOI 10.35776/MNP.2019.10.01
UDC 628.166:661.417/.418

Pchel'nikov I. V., Terikov A. S., Nguen Tkhi Tuan Z’ep, Shchukin S. A.

The study of direct electrolysis of water in the Vietnam Sea
in the production of sodium hypochlorite

Summary

Electrochemical sodium hypochlorite is used at water supply facilities all around the world. The use of natural waters containing chlorides as a raw material is very promising since it greatly simplifies the process flow scheme for producing sodium hypochlorite. Direct electrolysis technology can be retrofitted into the existing water treatment schemes without significant changes. The use of natural water containing chlorides eliminates the purchase of salt which reduces the cost of the finished product. The results of studies of direct electrolysis of water in the Vietnam Sea are presented. During the experiments the effect of seawater flow rate and current density on the concentration of active chlorine in the resulting sodium hypochlorite, the change in the current chlorine yield and the specific energy consumption per 1 kg of generated active chlorine were determined. The main process parameters are determined that provide for producing sodium hypochlorite by direct electrolysis of sea water using an iridium-ruthenium oxide titanium anode as electrodes. It was shown that the current chlorine yield reaches maximum values (85–90%) at an active chlorine concentration in the product of 2 ± 0.2 g/dm3 which motivate the technological and economic feasibility of obtaining sodium hypochlorite from sea (ocean) water.

Key words

, , , ,

Скачать/download (PDF) free access

 

vstmag engfree 200x100 2

Banner Oct 2024

ЭТ 2024 200х200px V2

myproject msk ru

Баннер конференции г. Пятигорск

мнтк баннер

souz ingenerov 02

Aquatherm 200x200 gif ru foreign