Tag:microplastic

№12|2025

ENVIRONMENTAL PROTECTION

UDC 502.1:537.312.53
DOI 10.35776/VST.2025.12.04

Karmanov Ruslan, Егорова М. Д.

Effect of ultra violet exposure on polymer fragmentation in aqueous media

Summary

Studying microplastics distribution in aqueous media requires understanding polymer fragmentation processes effected by the natural factors. It is widely accepted that UV radiation is the most important factor resulting in (relatively) rapid degradation of polymers: the solar radiation initiates autocatalytic thermal oxidation that is the trigger of polymer degradation in the environment. Wind and additional mechanical stress cause molecular chains to break, which, in the presence of oxygen, leads to increased plasticity of the material (so-called chemico-mechanical degradation). Mechanical fragmentation can also accelerate if the material already bears the traces of aging due to other destructive factors. As part of the study, laboratory experiments were conducted to accelerate the «aging» of polymers by exposing them to UV radiation on water surface at an intensity of 1.16 W/m2 until the first signs of fragmentation appeared on the polymer samples. Based on the obtained experimental data, the residence time of the target polymers – polyethylene (PE) and polypropylene (PP) – in the Izhevsk water bodies under the natural solar UV radiation conditions before the first signs of fragmentation appeared was calculated. The calculations show that while PE and PP entering the aqueous media being exposed to the natural UV radiation, the first signs of polymer fragmentation appear in 730 days in winter and 136 days in summer.

Key words

, , , , ,

 

№07|2023

SURFACE RUNOFF TREATMENT

UDC 628.33:628.212.2
DOI 10.35776/VST.2023.07.07

Sukhomlinov Viktor, Melekhov Roman, Golosniakov Vitalii

Efficient treatment of surface runoff

Summary

The experience of practical operation of flow-through systems for surface runoff treatment in different real-life environment on the territory of the Russian Federation showed their complete technological failure. In the estimation of specialists, the process and design parameters of flow-through plants do not comply with the design standards in force in the Russian Federation, the declared degree of surface runoff treatment being unachievable; that is, virtually, flow-through systems simulate treatment processes. Along with the traditional set of pollutants typical for surface runoff (sand, suspended solids, oil products and heavy metals), microplastics pose a real threat to water bodies that receive storm water. Technological inconsistency of flow-through treatment systems and new objective tasks of removing additional types of pollution from surface runoff necessitate the use of reliable process solutions for the treatment of surface runoff.

Key words

, , , , , ,

 

Журнал ВСТ включен в новый перечень ВАК

Шлафман В. В. Проектирование под заданную ценность, или достижимая эффективность технических решений – что это?

Banner Kofman 1